Service and Repair - Honda 1995 Prelude L4-2.3L DOHC Service Manual

Ignition Switch: Service and Repair

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1995 Honda.

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable.
3. Remove dashboard lower cover and left knee bolster, then the left kick panel.
3. Remove steering column covers.
4. Disconnect ignition switch electrical connectors from dash fuse box and main wire harness.
5. Remove cover screw and cover.
6. Remove two switch screws, then the switch.
7. Reverse procedure to install.
8. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.