| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2.5L Eng | 4.70 OZS. | 0.13 L | POE Oil YN-34 | Approximate capacity. | S | |
| Air Cond Refrigerant | 2.5L Eng | 1.20 LBS. | 0.54 KG | R-1234yf | Approximate capacity. | S | |
| Automatic Transmission Fluid | Trans Mfr CD HF45 | Dry Transmission | 5.00 QTS. | 4.73 L | MOTORCRAFT Automatic Transmission Fluid MERCON ULV | Approximate capacity. | S |
| Brake Fluid | N/A | N/A | MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. | Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage. Fill between "max" and "min" lines on reservoir. | S | ||
| Differential Gear Oil | Rear Axle | 0.80 QTS. | 0.75 L | MOTORCRAFT Disconnect Rear Drive Unit | Approximate capacity. | S | |
| Engine Coolant | 2.5L Eng | High Temperature Circuit | 9.62 QTS. | 9.1 L | MOTORCRAFT Yellow Antifreeze/Coolant Prediluted | S | |
| Engine Coolant | 2.5L Eng | Low Temperature Circuit | 4.97 QTS. | 4.7 L | MOTORCRAFT Yellow Antifreeze/Coolant Prediluted | S | |
| Engine Oil | 2.5L Eng | w/Filter | 5.70 QTS. | 5.39 L | MOTORCRAFT SAE 0W-20 Full Synthetic Motor Oil | Approximate capacity. | S |
| Fuel Tank | Platinum Hybrid,ST-Line Hybrid,ST-Line Select Hybrid,2.5L En | 14.20 GALS. | 53.75 L | S | |||
| Fuel Tank | Plug-In Hybrid,ST-Line Elite Hybrid,ST-Line Hybrid,ST-Line S | 11.20 GALS. | 42.39 L | S | |||
| Transfer Case Fluid | w/Cooler | 0.45 QTS. | 0.42 L | MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant | Approximate capacity. | S | |
| Transfer Case Fluid | w/o Cooler | 0.40 QTS. | 0.37 L | MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant | Approximate capacity. | S | |
| Windshield Washer Fluid | N/A | N/A | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick Lookups: Fluids
This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2025 Ford.
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.