Axle Nut
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2012 Ford Truck.
Tighten in a continuous rotation to 280 Nm (207 lb-ft) .
NOTICE: Do not tighten the wheel hub nut with the vehicle on the ground. The nut must be tightened to specification before the vehicle is lowered onto the wheels. Wheel bearing damage will occur if the wheel bearing is loaded with the weight of the vehicle applied.
NOTICE: Install and tighten the new wheel hub nut to specification in a continuous rotation. Always install a new wheel hub nut after loosening or when not tightened to specification in a continuous rotation or damage to the component may occur.
NOTE: Apply the brake to keep the halfshaft from rotating.
Install the new wheel hub nut.
Rear Axle Nut
To install, tighten the new nut to 340 Nm (251 lb-ft).