Air Flow Meter/Sensor: Service and Repair

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2012 Ford Truck.

AI Repair Guides



Mass Air Flow (MAF) Sensor









Removal and Installation

1. Disconnect the Mass Air Flow (MAF) sensor electrical connector.

2. Remove the 2 MAF (Mass Air Flow) sensor screws and the MAF (Mass Air Flow) sensor.
- To install, tighten to 10 Nm (89 lb-in).


3. To install, reverse the removal procedure.
← Back to Air Flow Meter/SensorAll Makes