ECM/PCM Programming
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2007 Dodge.
STANDARD PROCEDURE - PROGRAMMING THE PCM/ECM USING THE SCAN TOOL
CAUTION: Read all notes and cautions for programming procedures.
1. Connect a battery charger to the vehicle.
2. Connect the scan tool.
3. Select "ECU View".
4. Select "WCM Wireless Control Module".
5. Select "Miscellaneous Functions".
6. Select "PCM Replaced".
7. Enter the PIN when prompted.
8. Press "Next".
9. Cycle the Key.
10. Verify the repair.