Body Control Module: Service and Repair

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2006 Dodge.

AI Repair Guides
MODULE-FRONT CONTROL

NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove mounting fasteners.
3. Disconnect electrical connectors and remove Front Control Module (FCM).

INSTALLATION




1. Position Front Control Module (FCM) and connect electrical connectors.
2. Install and tighten mounting fasteners.
3. Connect battery negative cable.
← Back to Body Control ModuleAll Makes