Refrigerant Pressure Sensor / Switch: Service and Repair
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1987 Dodge.
1. Disconnect wire connector at switch.
2. Rotate switch counterclockwise to remove from pressure switch port (the pressure switch is mounted to a male schrader type reciever and will vent a small amount of freon).
3. Replace O-ring. Refrigerant oil must be applied to new O-ring.
4. Reverse procedure to reinstall. Torque to 6 N.m (50 in.lbs.).