P1698 No Bus Message From Trans Control Module
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Chrysler.
P-1698 NO CCD MESSAGES FROM TCM
WHEN MONITORED
With the engine running.
SET CONDITION
No CCD messages are received from the TCM for 10 seconds.
POSSIBLE CAUSES
- DRB does not show bus operational
- CCD wiring harness observable defect
- CCD bus (+) circuit open between PCM and TCM
- CCD bus (-) circuit open between PCM and TCM
- PCM defective (no CCD message)
- TCM defective (no CCD message)