PCM Status Failure

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Chrysler.

SYMPTOM
PCM STATUS FAILURE

WHEN MONITORED
This condition is monitored at ignition ON and continuously during an ignition on cycle.

SET CONDITION
This condition exists when a PCM STATUS bus message was not received from the PCM.

NOTE: Failure maturity time is 20 seconds.

POSSIBLE CAUSES
- PCM EEPROM DTC present
- SKIM communication link failure
- SKIM PCM failure
- SKIM PCM problem
- SKIM unidentified problem

← Back to Vehicle Theft Security System All Makes