No Cluster CCD Bus Message (Stored)

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Chrysler.

AI Repair Guides
SYMPTOM
NO CLUSTER CCD BUS MESSAGE (STORED)

TEST NOTE: All symptoms listed above are diagnosed using the same tests. The title for the tests will be AECM & CLUSTER CCD MESSAGE MISMATCH (STORED).

WHEN MONITORED
Continuously when the ignition is on.

SET CONDITION
If the ACM fails to see the status message for 5 continuous seconds the code will be set.

POSSIBLE CAUSES
- Stored code has become active
- Stored code has not been reproduced
← Back to Restraint SystemsAll Makes