Speed Control Switch
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Chrysler.
The speed control switch is mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS.
1. Turn off ignition.
2. Remove two screws from side of the switch.
3. Rock switch away from airbag and steering wheel.
4. Disconnect two-way electrical connector.
5. Repeat for the other switch.
INSTALLATION
1. For installation, turn off ignition and reverse above procedures.