Radio Programming and Setup - Chevy Truck 2013 Traverse AWD V6-3.6L Service Manual

Radio Programming and Setup

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2013 Chevy Truck.

Radio Programming and Setup

Each of the following service procedures require programming or setup procedures to be performed on the radio.

Radio Replacement

Important:
The radio setup files will configure the radio amplifier (if equipped), internal equalization settings, and program the vehicle identification number (VIN). Without the following setup procedure, the sound quality and volume of the radio may be degraded.

For uplevel radios, setup is completed using the Service Programming System (SPS). Refer to Service Programming System (SPS) Service Programming System (SPS).

For the base radio, use the program VIN procedure available in Special Functions menu of the scan tool. After programming the VIN cycle the ignition key with the retained accessory power (RAP) disabled.