Testing and Inspection
Locations- Seat Back Ventilation Heating and Cooling Module - Passenger (KB6)
- Heated Seat Control Module - Driver (KA1)
- Seat Back Ventilation Heating and Cooling Module - Driver (KB6)
- Seat Cushion Ventilation Heating and Cooling Module - Driver (KB6)
- Seat Cushion Ventilation Heating and Cooling Module - Passenger (KB6)
Service and Repair
Diagrams- Heated Seat Control Module - Driver X1 (KA1 without A45)
- Heated Seat Control Module - Driver X2 (KA1 without A45)
- Heated Seat Control Module - Driver X3 (KA1 without A45)
- Heated Seat Control Module - Driver X4 (KA1 without A45)
- Seat Back Ventilation Heating and Cooling Module - Driver (KB6)
- Seat Back Ventilation Heating and Cooling Module - Passenger (KB6)
- Seat Cushion Ventilation Heating and Cooling Module - Driver (KB6)
- Seat Cushion Ventilation Heating and Cooling Module - Passenger (KB6)
Seat Temperature Control Module
This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2012 Chevrolet.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
More supporting gear
Torque wrench
Use the factory procedure with the right tightening tool.
Manual-based work becomes much easier when you can torque correctly.
Shop on Amazon →Trim tool set
Useful for clips, covers, and trim pieces called out by the manual.
Most manual procedures assume you have a good trim removal kit.
Shop on Amazon →Multimeter kit
Great for electrical troubleshooting and manual-tested circuits.
Electrical work in manuals often needs a meter more than another wrench.
Shop on Amazon →