Door Lock Control Module Replacement
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2012 Chevrolet.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
Door Lock Control Module Replacement
Removal Procedure
1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side Front Side Door Trim Panel Replacement - Left Side.
Important:
The door control module is part of the power window regulator and is serviced as an assembly.
2. Remove the window regulator. Refer to Door Window Regulator Replacement Service and Repair.
Installation Procedure
1. Install the window regulator to the door. Refer to Door Window Regulator Replacement Service and Repair.
2. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side Front Side Door Trim Panel Replacement - Left Side.
3. Refer to Control Module References Control Module References for programming and setup information.