Window Motor Programming - Express Function
This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2009 Chevrolet.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
More supporting gear
Torque wrench
Use the factory procedure with the right tightening tool.
Manual-based work becomes much easier when you can torque correctly.
Shop on Amazon →Trim tool set
Useful for clips, covers, and trim pieces called out by the manual.
Most manual procedures assume you have a good trim removal kit.
Shop on Amazon →Multimeter kit
Great for electrical troubleshooting and manual-tested circuits.
Electrical work in manuals often needs a meter more than another wrench.
Shop on Amazon →Window Motor Programming - Express Function (RPO AXC/AXE)
Express Window Programming and Setup
Anytime battery power is lost or if the power window motor is replaced, the express down and express up features must be relearned.
Follow the procedure below to program the power windows:
* Ignition ON, lower each window to the full down position and hold each window switch at the full down position for 5 seconds.
* Raise each window to the full up position and hold each window switch at the full up position for 5 seconds.
* Verify that the express down and express up features are working by pressing the power window switch past it's first detent and releasing and pulling the power window switch past it's first detent and releasing. If the express down and express up functions are successfully relearned, the power window should roll completely down and roll completely up.