Inflatable Restraint Sensing and Diagnostic Module Programming and Setup

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2006 Chevrolet.

AI Repair Guides


INFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE PROGRAMMING AND SETUP

IMPORTANT: The air bag indicator light may remain ON after the body control module (BCM), or sensing and diagnostic module (SDM) is replaced, and during the programming procedure for the BCM until after the procedure is completed, and the ignition key is cycled OFF and ON.

If the SDM is replaced you must perform the BCM reprogramming procedure in order for the BCM to relearn the new SDM ID. Refer to Body Control Module (BCM) Programming/RPO Configuration.
← Back to Programming and RelearningAll Makes