Engine Control Module: Service and Repair

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1982 Chevrolet.

AI Repair Guides

1. Disconnect battery ground cable.
2. Disconnect two ECM electrical connectors.
3. Remove the ECM mounting hardware.
4. Remove ECM from passenger compartment.
5. Reverse procedure to install.

CAUTION: Replacement ECM is supplied without engine calibration unit (PROM) and care must be taken when removing the PROM from a defective ECM as it will be used in the replacement ECM.



← Back to Engine Control ModuleAll Makes