Wiper Control Module: Service and Repair
This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1982 Chevrolet.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
More supporting gear
Torque wrench
Use the factory procedure with the right tightening tool.
Manual-based work becomes much easier when you can torque correctly.
Shop on Amazon →Trim tool set
Useful for clips, covers, and trim pieces called out by the manual.
Most manual procedures assume you have a good trim removal kit.
Shop on Amazon →Multimeter kit
Great for electrical troubleshooting and manual-tested circuits.
Electrical work in manuals often needs a meter more than another wrench.
Shop on Amazon →CAVALIER, CIMARRON, SUNBIRD & 2000
1. Disconnect battery ground cable.
2. Remove headlamp switch knob by depressing retaining clip behind knob and pulling knob from shaft.
3. Remove lefthand trimplate attaching screws and the trimplate.
4. Remove screws retaining module to adapter assembly.
5. Disconnect wire connectors from module.
6. Remove module from instrument panel.
7. Reverse procedure to install.