Engine Controls - ECM May Contain Wrong PROM
This is the exact OEM manual section for the path above. Use the breadcrumb to move up or down the tree until you reach the precise year, make, model, and subsystem you need.
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1982 Chevrolet.
Revenue RailIntent: manual
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
More supporting gear
Torque wrench
Use the factory procedure with the right tightening tool.
Manual-based work becomes much easier when you can torque correctly.
Shop on Amazon →Trim tool set
Useful for clips, covers, and trim pieces called out by the manual.
Most manual procedures assume you have a good trim removal kit.
Shop on Amazon →Multimeter kit
Great for electrical troubleshooting and manual-tested circuits.
Electrical work in manuals often needs a meter more than another wrench.
Shop on Amazon →Number: 88-42
Section: 6E
Date: Sept., 1987
Subject: SERVICE REPLACEMENT ELECTRONIC MODULES (ECM) WITH PROM INSTALLED
Model and Year: 1981-88 ALL MODELS
TO: ALL CHEVROLET DEALERS
It has been brought to our attention that some service replacement electronic control modules (ECM's) have contained a PROM. A PROM should not have been included in a replacement ECM as it may not be the correct PROM for the vehicle.
When this situation is encountered, the PROM should be removed from the replacement ECM and the PROM from the vehicle should be installed.