EVAP Test State

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Cadillac.

AI Repair Guides
The display shows the [1][2]EVAP test state as Wait For Purge, Test Running or Test Completed. This display indicates the current state of the PCM's EVAP test or the scan tool's Service Bay Test. Wait For Purge indicates conditions are not correct for sufficient purge flow. Slightly raising engine idle speed may increase purge flow enough to allow the diagnostic tests to start.
← Back to Scan Tool Data Definitions - Powertrain SystemsAll Makes