HVAC Control Module Programming and Setup

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2006 Buick.

AI Repair Guides


HVAC CONTROL MODULE PROGRAMMING AND SETUP

Each of the following service procedures may require programming or setup procedures to be performed on the HVAC control module or HVAC actuators.

HVAC Control Module Replacement
If the HVAC control module is replaced no additional procedures are necessary.

HVAC Control Module Reprogramming
Do not reprogram the HVAC control module unless directed by a service procedure or a service bulletin.

Reprogram the HVAC Control Module. Refer to Service Programming System (SPS).

Actuator Replacement
If an actuator is replaced, a Re-Calibration of the actuator is not necessary. The HVAC module knows the exact location of the door when the HVAC system is turned on.
← Back to Programming and RelearningAll Makes