PASS-Key II - Additional Keys - Buick 1999 LeSabre V6-3.8L VIN K Service Manual

PASS-Key II - Additional Keys

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Buick.

IMPORTANT: When servicing the PASS-Key II system, obtain all the vehicle ignition keys. Verify the key code values with the J 35628-A.

1. In order to copy a PASS-Key II ignition key, determine the necessary key code or resistance value.
2. Determine the master ignition key code using the J 35628-A and the PASS-key II (VATS) Interrogator as outlined in the following procedure:

IMPORTANT: Disconnect the tool wiring connectors.

2.1. Turn ON the J35628-A.
2.2. Insert the key into the tool lock cylinder.
2.3. Note the measured key code of the master ignition key as displayed on the key code reader.
2.4. Obtain a key blank matching the key code.
2.5. Cut the key blank to match the original key.