Service and Repair - Buick 1999 LeSabre V6-3.8L VIN K Service Manual

Body Control Module: Service and Repair

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Buick.

REMOVAL PROCEDURE
1. Remove the right Closeout/insulator panel.
2. Disconnect the electrical connectors from the multifunction alarm, lock, and lighting module.
3. Remove the module (1).
Pressing down on the center tab of the mounting bracket, slide downward the module until the rails disengage.

INSTALLATION PROCEDURE
1. Install the module (1).
Align the mounting rails on the module with the bracket, slide forward the module until the locking tab engages.
2. Connect the electrical connectors.
3. Install the right Closeout/Insulator panel.