Blower Control Module Description

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1999 Buick.

AI Repair Guides
The [1][2]blower control module is a solid state device that operates the blower motor. The blower control module outputs a voltage the varies between 0 volts when the blower motor is OFF and a maximum blower speed of 12 volts.

In order to determine the appropriate output voltage, the [1][2]blower control module monitors a varying voltage signal (between 2-8 volts) from the heater and A/C programmer. The module then amplifies the signal and supplies voltage directly to the blower motor.
^ Amplifies the signal
^ Applies voltage directly to the blower motor

The heater and A/C programmer monitors the output voltage from the [1][2]blower control module.
← Back to HVAC System - AutomaticAll Makes