Reverse Input & Input Clutches

Need a step-by-step guide?

Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1992 Buick.

1. Install selective thrust washer onto the input housing.

2. Install bearing assembly with inside (black race) facing toward the oil pump.

3. Install reverse input clutch assembly onto the input clutch assembly. Ensure all clutches are fully engaged.

4. Install reverse input and input clutch assembly into transmission case. Ensure all clutches are fully engaged. I When properly assembled, the reverse input clutch housing should be located just below the case oil pump face.

← Back to Case & Internal Components All Makes