Keyless Entry Transmitter: Service and Repair
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1992 Buick.
One (1) or two (2) transmitters may be programmed. When two (2) transmitters are to be programmed, they must be programmed during the same program sequence (see procedure).
1. Connect a fused jumper to the Keyless Programming Connector from terminal "A" to terminal "B". The Keyless Entry Module will cycle all the Door Lock Motors once.
2. Press any button on the transmitter once. In response, the Keyless Entry Module will cycle all the Door Lock Motors once.
3 If a second transmitter is to be programmed, press any button on the second transmitter once. In response, the Keyless Entry Module will cycle all the Door Lock Motors once
4. Remove the fused jumper from the Keyless Programming Connector