Engine Control Module: Service and Repair
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 1985 Buick.
When replacing a production ECM with a service ECM, transfer the broadcast code and production number from the production unit to the service unit. Also, during replacement, the PROM or MEM-CAL must be removed from the ECM being replaced and transferred to the new unit. Refer to PROM Or MEM-CAL, Replace for procedure.
1. Disconnect battery ground cable.
2. Disconnect two ECM electrical connectors.
3. Remove ECM mounting hardware.
4. Remove ECM from passenger compartment.
5. Reverse procedure to install.