Function 08 - Read Measured Value Block
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2006 Audi.
General Information
The new seat adjustment with memory generation features On Board Diagnostic (OBD) capability. The control module for seat adjustment with memory is equipped with a DTC Memory.
Malfunctions occurring in monitored components/wiring are stored in DTC memory together with an indication of the type of malfunction.
If any control elements are replaced they must be adapted and a basic setting must be initiated => [ Seat Control Element, Basic Setting ].
On Board Diagnostic (OBD), initiating program
Test requirements:
• Voltage supply and fuses for appropriate systems OK.
• Connecting scan tool (VAS5051) => [ VAS 5051, Connecting ] VAS 5051, Connecting
• Switch ignition on.
• If no display appears, use wiring diagram to check power supply for (VAS5051)
• Additional operating instructions can be called up by pressing the Scan Tool HELP button.
• The next step in the program sequence can be selected by pressing the -> button.
• Incorrect entries can be terminated by pressing the C button..
- Switch on printer by pressing Print button (indicator lamp in button lights up).
- Press button 1 for "Rapid data transfer".
Indicated on display:
Rapid data transfer HELP
Enter address word XX
Function 08 - Read Measured Value Block
• The function "Read Measuring Value Block" can be used to determine the current status of the system.
Performing function 08, Read measured value block
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons 0 and 8.
Indicated on display:
Rapid data transfer Q
08 - Read Measuring Value Block
- Confirm entry with Q button.
Display:
Read Measuring Value Block
Enter display group number XXX
- Enter display group 001 and confirm entry with Q button.
The measuring value block selected will be displayed in standardized form. Evaluation => [ Measured Value Block, Overview ]