Function 06 - End Output
Need a step-by-step guide?
Get an AI-powered repair guide with parts lists, cost estimates, and clear instructions for your 2006 Audi.
General Information
The new seat adjustment with memory generation features On Board Diagnostic (OBD) capability. The control module for seat adjustment with memory is equipped with a DTC Memory.
Malfunctions occurring in monitored components/wiring are stored in DTC memory together with an indication of the type of malfunction.
If any control elements are replaced they must be adapted and a basic setting must be initiated => [ Seat Control Element, Basic Setting ].
On Board Diagnostic (OBD), initiating program
Test requirements:
• Voltage supply and fuses for appropriate systems OK.
• Connecting scan tool (VAS5051) => [ VAS 5051, Connecting ] VAS 5051, Connecting
• Switch ignition on.
• If no display appears, use wiring diagram to check power supply for (VAS5051)
• Additional operating instructions can be called up by pressing the Scan Tool HELP button.
• The next step in the program sequence can be selected by pressing the -> button.
• Incorrect entries can be terminated by pressing the C button..
- Switch on printer by pressing Print button (indicator lamp in button lights up).
- Press button 1 for "Rapid data transfer".
Indicated on display:
Rapid data transfer HELP
Enter address word XX
Function 06 - End Output
Implementing Function, 06 - End Output
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press buttons 0 and 6.
Indicated on display:
Rapid data transfer Q
06 - End output
- Confirm entry with Q button.
Indicated on display:
Rapid data transfer HELP
Enter address word XX
- Switch ignition off.
- Disconnect Scan Tool (VAS5051) (ST).