Where is the purge valve?

Usually on or near the intake manifold, connected to a vacuum hose and the charcoal canister.

Can I test the purge valve?

Yes — apply 12V directly to the valve. You should hear it click and be able to blow through it when energized.

Low Severity

EVAP System

Electrical fault in the EVAP purge valve circuit.

Common Fix

Replace purge valve

Estimated Cost (DIY)

$15 - $50

Failed purge valvelikely

Wiring issuepossible

Need to read or clear this code?

Where is the purge valve?: Usually on or near the intake manifold, connected to a vacuum hose and the charcoal canister.
Can I test the purge valve?: Yes — apply 12V directly to the valve. You should hear it click and be able to blow through it when energized.

Need a diagnosis for your specific vehicle?

100% Free — No signup required