P0261
High SeverityCylinder 1 Injector Circuit Low
Fuel System
What Does P0261 Mean?
Low voltage in cylinder 1 injector driver circuit.
Common Fix
Replace cylinder 1 injector
Estimated Cost (DIY)
$40 - $150
Common Causes
How to Diagnose P0261
- 1Check injector connector
- 2Measure injector resistance
- 3Check wiring for shorts to ground
- 4Replace injector if coil shorted
OEM Diagnostic Flowchart
Scroll to load technician if/then branches.
Read live data and freeze frame for P0261 to pinpoint the cause before buying parts.
Related Resources
Repair guides, symptom pages, and wiring diagrams related to P0261.
OEM Manual Evidence
Browse →A L L Diagnostic Trouble Codes ( DTC ) — 2013 GMC Truck Terrain AWD V6-3.6L Service Manual | Operation CHARM Operation CHARM : Car repair m...
A L L Diagnostic Trouble Codes ( DTC ) — 2013 GMC Truck Terrain FWD V6-3.6L Service Manual | Operation CHARM Operation CHARM : Car repair m...
A L L Diagnostic Trouble Codes ( DTC ) — 2013 GMC Truck Acadia FWD V6-3.6L Service Manual | Operation CHARM Operation CHARM : Car repair ma...
A L L Diagnostic Trouble Codes ( DTC ) — 2013 GMC Truck Acadia AWD V6-3.6L Service Manual | Operation CHARM Operation CHARM : Car repair ma...
Related Symptoms
Browse →Exact Vehicle Hubs
Browse →Open the exact vehicle hub grounded by OEM manual evidence related to P0261.
Open the exact vehicle hub grounded by OEM manual evidence related to P0261.
Open the exact vehicle hub grounded by OEM manual evidence related to P0261.
Open the exact vehicle hub grounded by OEM manual evidence related to P0261.
Related Codes
The fuel injector on cylinder 1 has a circuit fault. It may not be firing.
High voltage in cylinder 1 injector circuit. Usually open circuit.
Cylinder 1 is misfiring — not firing properly. Could be spark plug, coil, injector, or compression issue on that specific cylinder.
Frequently Asked Questions
- What is injector circuit low?
- It means the ECM sees low voltage/resistance in the injector circuit, often from a shorted injector coil.
- Can I test injector resistance?
- Yes — unplug the injector and measure with a multimeter. Compare to specs (typically 11-18 ohms).

