P0107

Medium Severity

MAP/BARO Sensor Circuit Low Input

Fuel System

What Does P0107 Mean?

MAP sensor voltage is below the expected minimum. The ECM sees this as extremely high vacuum, causing incorrect fuel calculations.

Common Fix

Replace MAP sensor

Estimated Cost (DIY)

$20 - $80

Symptoms

  • ⚠️Rough idle
  • ⚠️Stalling
  • ⚠️Loss of power
  • ⚠️Poor fuel economy

Related Symptoms

Common Causes

Faulty MAP sensorlikely
Short in sensor wiringpossible
Bad ground connectionpossible
ECM issueunlikely

How to Diagnose P0107

  1. 1Check sensor wiring and connector
  2. 2Measure MAP sensor output voltage
  3. 3Verify reference voltage (5V)
  4. 4Replace sensor if output stuck low

OEM Diagnostic Flowchart

Scroll to load technician if/then branches.

Related Resources

Repair guides, symptom pages, and wiring diagrams related to P0107.

Frequently Asked Questions

What does P0107 mean?
P0107 means the MAP sensor voltage is too low. Usually a failed sensor or wiring problem.
Is P0107 expensive to fix?
No — MAP sensors cost $20-$80 and are usually easy to replace.

Need a diagnosis for your specific vehicle?

Start Free AI Diagnosis →

100% Free — No signup required